Advertisement


 

 

 

 

Vespa forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Axle bearing,seal on selector box side removel
grfx
Newbie
Posts: 3
Permalink
Post Axle bearing,seal on selector box side removel
on: August 11, 2017, 21:36
Quote

I've got a 1965 VLB 1T engine apart, Starting a complete restore. The one bearing (needle bearing} on the axle gear shaft toward the selector box is half hidden by case. I looks like no snap ring so I would think it should just tap out. I removed the needles and cage but the outer part is still in case. Any suggestions on how to remove. I don't care about damaging it as all bearings and seals will be replaced. I'm thinking about heating case and use a small socket that covers as much of the bearing as possible. Thanks for any help

grfx
Newbie
Posts: 3
Permalink
Post Re: Axle bearing,seal on selector box side removel
on: August 12, 2017, 19:12
Quote

Solved: Heat and solid blows.

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.012 seconds.


Since August 2011 - © Aerostato, Seattle - All Rights Reserved.